Internal Control Module Read Only Memory Error
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P0605 SUBARU Possible Causes
- Engine Control Module (ECM) may be faulty
- ECM harness power supply circuit is open or shorted
- ECM harness ground circuit is open or shorted
How do I fix code P0605 SUBARU?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Check the PCM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the PCM.
Cost of diagnosing the P0605 SUBARU code
The cost of diagnosing the P0605 SUBARU code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
Indicates the PCM has experienced an internal memory fault.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine may not start
P0605 SUBARU Description
The Engine Control Module (ECM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the ECM is functioning properly. If any malfunction is detected, the ECM sets the P0605 code and illuminates the MIL.