Transmission Coding Error
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P0610 FORD Possible Causes
- ECM Harness power supply circuit is open or shorted
- ECM Programing
- Faulty ECM
How do I fix code P0610 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.
Cost of diagnosing the P0610 FORD code
The cost of diagnosing the P0610 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The ECM is programmed for an automatic/manual transmission but is detecting the opposite
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0610 FORD Description
The ECM continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self−check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.