Internal Control Module Engine RPM Performance
Table of contents
P061C MERCURY Possible Causes
- Faulty Crankshaft Position Sensor (CKP)
- CKP harness is open or shorted
- CKP circuit poor electrical connection
- Faulty Camshaft Position Sensor (CMP)
- CMP harness is open or shorted
- CMP circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How do I fix code P061C MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P061C MERCURY code
The cost of diagnosing the P061C MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P061C MERCURY Description
The Powertrain Control Module (PCM) compares the actual engine speed calculated from the crank angle sensor signal cycle with the estimated engine speed calculated from the number of the crank angle sensor signal pulses after a lapse of the specified time. The PCM sets the OBDII code when the calculated value is not to factory specifications.