Secondary Shutter Valve High Input
Table of contents
P0662 MAZDA Possible Causes
- Faulty Secondary Shutter Valve (SSV) Solenoid Valve
- Secondary Shutter Valve Solenoid Valve harness is open or shorted
- Secondary Shutter Valve (SSV) solenoid valve circuit poor electrical connection
How do I fix code P0662 MAZDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0662 MAZDA code
The cost of diagnosing the P0662 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The Engine Control Module (ECM) has detected a low signal from the Secondary Shutter Valve (SSV)
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0662 MAZDA Description
The Powertrain Control Module (PCM) monitors the Secondary Shutter Valve (SSV) solenoid valve control voltage when the PCM turns the SSV solenoid valve off. If the control voltage is less than 5.8 V, the PCM determines that the SSV solenoid valve control circuit voltage is low.