Cylinder 2 Glow Plug Incorrect
Table of contents
P06C6 FORD Possible Causes
- Faulty cylinder #2 glow plug
- Cylinder #2 glow plug harness is open or shorted
- Cylinder #2 glow plug circuit poor electrical connection
- Faulty glow plug module
How do I fix code P06C6 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P06C6 FORD code
The cost of diagnosing the P06C6 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P06C6 FORD Description
The glow plug system is used to assist in providing the heat required to begin combustion during cold engine temperatures. The glow plugs are heated before and during cranking, as well as initial engine operation. The Engine Control Module (ECM) controls the glow plug ON times by monitoring coolant temperature and glow plug voltage. The Glow Plug system has eight inpidual glow plug supply circuits between the controller and the glow plugs. If the feedback voltage from the controller to the ECM is not within range, the ECM sets the OBDII code.