Transmission Range Sensor Circuit Performance
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P0706 HYUNDAI Possible Causes
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
How do I fix code P0706 HYUNDAI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Adjustment Procedure:
- 1. Place the selector lever in the “N” (Neutral) position.
- 2. Loosen the manual control lever lock nut to separate the cable and lever.
- 3. Place the manual control lever in the “N” (Neutral) position.
- 4. Turn the transaxle range switch body until the 12 mm (.47 in.) wide end of the manual control lever aligns with the switch body flange [12 mm (0.472 in.) wide portion].
- 5. Tighten the attaching bolts (2 pcs.) to the specified torque.
- When setting up the switch body, be careful O-ring does not drop from the switch body. Tighten the attaching bolts carefully.
- 6. Make sure that the selector lever is in the “N” (Neutral) position.
- 7. Adjust the flange nut so that there is no slack in the control cable and make sure that the selector lever operates smoothly.
- 8. Run the vehicle and confirm that the transaxle is set in each range when the selector lever is shifted to each position.
Cost of diagnosing the P0706 HYUNDAI code
The cost of diagnosing the P0706 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The transmission range switch detects the selector lever position and sends a signal to the TCM.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0706 HYUNDAI Description
The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM).