Output Shaft Speed Sensor No Signal
Table of contents
P0722 Possible Causes
- Faulty Output Speed Sensor (OSS)
- Output Speed Sensor harness is open or shorted
- Output Speed Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How do I fix code P0722?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0722 code
The cost of diagnosing the P0722 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Speedometer improper reading
- Possible shifting problems
P0722 Description
The Output Shaft Speed (OSS) Sensor provides the Powertrain Control Module (PCM) with information about the rotational speed of an output shaft. The PCM uses the information to control and diagnose powertrain behavior. In some applications, the sensor is also used as the source of vehicle speed. The sensor may be physically located in different places on the vehicle, depending upon the specific application. The design of each speed sensor is unique and depends on which powertrain control feature uses the information that is generated. The Diagnostic Trouble Code (DTC) will set if the PCM detects no signal from the OSS sensor.