2-3 Shift Solenoid Fault
Table of contents
P0757 JEEP Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2-3 Shift Solenoid Valve
- 2-3 Shift Solenoid Valve harness or connectors
- 2-3 Shift Solenoid Valve circuit is open or shorted
How do I fix code P0757 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0757 JEEP code
The cost of diagnosing the P0757 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The P0757 code is detected when the TCM has detected voltage on the 2-3 shift solenoid during a period when the solenoid is not active
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0757 JEEP Description
2-3 shift solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.