Shift Solenoid ‘C’ Malfunction
Table of contents
P0760 SUBARU Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid ‘C’ valve
- Shift solenoid ‘C’ valve harness or connectors
- Shift solenoid ‘C’ valve circuit is open or shorted
How do I fix code P0760 SUBARU?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0760 SUBARU code
The cost of diagnosing the P0760 SUBARU code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The P0760 code is detected when the TCM detects an improper voltage drop when it tries to operate the solenoid valve.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0760 SUBARU Description
Shift solenoid valve ‘C’ is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.