Clutch Pedal Switch ‘A’ Circuit
Table of contents
P0830 MERCURY Possible Causes
- Faulty clutch pedal position switch
- Clutch pedal position switch harness is open or shorted
- Clutch pedal position switch circuit poor electrical connection
How do I fix code P0830 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0830 MERCURY code
The cost of diagnosing the P0830 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0830 MERCURY Description
The Powertrain Control Module (PCM) monitors the clutch pedal position button of travel (CPP-BT) switch only during the calibrated engine speed range (cranking speed range). This DTC sets when the CPP-BT switch does not indicate that the clutch is disengaged (clutch pedal pressed) when the engine is cranked.