LC Pressure Switch Rationality
Table of contents
P083B VOLKSWAGEN Possible Causes
- TIPM Transmission Control Output Circuit Open
- LC Pressure signal circuit open
- LC Pressure signal circuit shortedn ground
- LC Pressure signal circuit shorted to voltage
- Transmission solenoid
- Internal transmission problems
- Faulty Powertrain Control Module (PCM)
How do I fix code P083B VOLKSWAGEN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P083B VOLKSWAGEN code
The cost of diagnosing the P083B VOLKSWAGEN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P083B VOLKSWAGEN Description
The Transmission system uses three pressure switches to monitor the fluid pressure in the L/R, LC, and OD elements. The pressure switches are continuously monitored for the correct states in each gear. The LC pressure switch monitors the fluid pressure to the LC clutch to confirm proper operation of the LC solenoid. If the LC pressure switch is identified as closed in P or N, the code will immediately be set and normal operation will be allowed for that given key start. If the problem is identified for 3 successive ignition cycles, the transmission will go into Limp-in mode.