Traction Control Input Signal Low
Table of contents
P0858 DODGE Possible Causes
- Faulty Electronic Brake Control Module (EBCM)
- EBCM Harness is open or shorted
- EBCM Circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How do I fix code P0858 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0858 DODGE code
The cost of diagnosing the P0858 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0858 DODGE Description
When traction control is active, the Electronic Brake Control Module (EBCM). sends a serial data message to the Engine Control Module (ECM) requesting torque reduction. When certain ECM DTCs are set, the ECM will not be able to perform the torque reduction for traction control. A serial data message is sent to the EBCM indicating that traction control is not allowed.