Transmission Fluid Pressure
Table of contents
P0867 JEEP Possible Causes
- Low / Dirty Transmission Fluid
- Faulty Transmission Fluid Pressure Sensor
- Transmission Fluid Pressure Sensor harness is open or shorted
- Transmission Fluid Pressure Sensor circuit poor electrical connection
How do I fix code P0867 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0867 JEEP code
The cost of diagnosing the P0867 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0867 JEEP Description
The Transmission Control Module (TCM) continuously monitors actual line pressure and compares it to the desired line pressure. If the difference between actual line pressure and desired line pressure is 10 psi (.7 kg/cm2 ) or greater, DTC P0867 will set. Transmission system will default to open loop line pressure control resulting in a fixed solenoid duty cycle. This duty cycle will change slightly depending on temperature and current gear.