Torque Converter Clutch Fluid Diagram
Table of contents
P0894 BUICK Possible Causes
- Low transmission fluid level
- Dirty or contaminated fluid
- Internal transmission failure
How do I fix code P0894 BUICK?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0894 BUICK code
The cost of diagnosing the P0894 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
When the Powertrain Control Module (PCM) detects excessive Torque Converter Clutch (TCC) slip when the TCC should be engage, then the trouble code P0894 is set.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0894 BUICK Description
The Powertrain Control Module (PCM) monitors the difference between engine speed and transmission output speed. In D3 drive range with Torque Converter Clutch (TCC) engaged, the engine speed should closely match the transmission output speed. In D4 drive range, with the TCC engaged, the TCC slip speed should be -20 to +50 RPM.