2-4/OD Hydraulic Pressure Test Failure
Table of contents
P0992 DODGE Possible Causes
- Faulty 2-4 or OD Hydraulic Pressure Switch
- 2-4 or OD Hydraulic Pressure Switch harness is open or shorted
- 2-4 or OD Hydraulic Pressure Switch circuit poor electrical connection
How do I fix code P0992 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0992 DODGE code
The cost of diagnosing the P0992 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0992 DODGE Description
When monitored, in any forward gear with the engine speed above 1000 RPM shortly after a shift and every minute thereafter. The Diagnostic Trouble Code (DTC) will set after a shift into a forward gear, with engine speed > 1000 RPM, the Transmission Control Module (TCM) momentarily turns on element pressure to the clutch that doesn’t have pressure to identify the correct pressure switch closes. If the pressure switch does not close 2 times the code sets.