Battery Charger Input Voltage Sensor Performance
Table of contents
P0D3E BUICK Possible Causes
- Faulty Battery Charger
- Battery Charger harness is open or shorted
- Battery Charger circuit poor electrical connection
How do I fix code P0D3E BUICK?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P0D3E BUICK code
The cost of diagnosing the P0D3E BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0D3E BUICK Description
The battery charger control module will diagnose its own systems and determine when a fault condition is present. Diagnostics and system status is communicated from the battery charger control module to the hybrid powertrain control module 2 through serial data. The hybrid powertrain control module 2 is the host controller for diagnostic trouble code (DTC) information.
The DTC for the battery charger control module is internal measurements that verify the charger is performing properly. The battery charger control module measures internal voltages, currents, and temperatures and verifies they are within the proper range.