Evaporative Emission Canister Purge Valve High Output
Table of contents
P1002 SAAB Possible Causes
- Faulty EVAP canister purge valve
- EVAP canister purge valve harness circuit open or shorted
- EVAP canister purge valve electrical connection
How do I fix code P1002 SAAB?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1002 SAAB code
The cost of diagnosing the P1002 SAAB code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1002 SAAB Description
The Engine Control Module (ECM) monitors the Evaporative Emission (EVAP) canister purge valve for open or short circuit. The Diagnostic Trouble Code (DTC) is triggered when the ECM has detected an open circuit or short to ground on the EVAP canister purge valve.