Humidity Sensor Module
Table of contents
P1009 RAM Possible Causes
- Faulty Humidity Sensor
- Humidity Sensor harness is open or shorted
- Humidity Sensor circuit poor electrical connection
How do I fix code P1009 RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1009 RAM code
The cost of diagnosing the P1009 RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1009 RAM Description
The Body Control Module (BCM) is the Local Interconnect Network (LIN) master for the humidity sensor. The humidity sensor detects humidity, dew point and windshield glass temperature, and sends this information to the BCM. The BCM then broadcasts the message over the Controller Area Network (CAN) data bus. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the internal circuitry and software validity.