Air Fuel Ratio Sensor 1 Heater Control Circuit High Bank 2
Table of contents
P1052 NISSAN Possible Causes
- Faulty Air Fuel Ratio Sensor 1 Bank 2
- Air Fuel Ratio Sensor 1 Bank 2 harness is open or shorted
- Air Fuel Ratio Sensor 1 Bank 2 circuit poor electrical connection
How do I fix code P1052 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1052 NISSAN code
The cost of diagnosing the P1052 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The current amperage in the heated air fuel ratio (A/F) sensor 1 heater circuit is out of the normal range. An excessively high voltage signal is sent to Engine Control Module (ECM) through the heated air fuel ratio (A/F) sensor 1 heater.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1052 NISSAN Description
The Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F) sensor 1 heater corresponding to the engine operating condition to keep the temperature of A/F sensor 1 element at the specified range.