BARO Solenoid Performance
Table of contents
P1107 JEEP Possible Causes
- Check for mechanical conditionHoses and tubing
- Vacuum supply to surge solenoid
- Failed Wastegate Actuator
- Failed Turbocharger
How do I fix code P1107 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1107 JEEP code
The cost of diagnosing the P1107 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The ECM did not detect a sufficient variance between the TIP sensor signal and the BARO pressure signal during turbo boost mode
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P1107 JEEP Description
The Barometric Pressure (BARO) sensor converts the atmospheric pressure into voltage signal that the ECM uses to modify the basic duration of he fuel injection discharge