Swirl Control Valve Control Vacuum Switch
Table of contents
P1165 NISSAN Possible Causes
- Clogged hose to Swirl control valve control vacuum check switch
- Swirl Control Valve Control Solenoid Valve harness is open or shorted
- Swirl Control Valve Control Solenoid Valve circuit poor electrical connection
- Faulty Swirl Control Valve Control Solenoid Valve
- Faulty Swirl control valve control vacuum check switch
How do I fix code P1165 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1165 NISSAN code
The cost of diagnosing the P1165 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1165 NISSAN Description
The Swirl Control Valve control vacuum check switch detects vacuum signal to the swirl control valve, and sends “ON” or “OFF” signal to the Engine Control Module (ECM).
When vacuum is supplied to the valve, the swirl control valve control vacuum check switch sends “OFF” signal to the ECM. The swirl control valve control vacuum check switch is not used to control the engine system, it is used for on board diagnosis.