Injection Control System Pressure Peak Fault
Table of contents
P1209 FORD Possible Causes
- Low Reservoir Oil Level
- Poor Oil Quality
- Injector “O” Ring Leak
- Faulty Injection Pressure Regulator (IPR) Valve
- Faulty Oil Pressure Pump
- Faulty Powertrain Control Module (PCM)
How do I fix code P1209 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Verify correct oil quality, viscosity, and fuel grade are being used for temperature conditions. Replace oil/fuel as necessary.
Cost of diagnosing the P1209 FORD code
The cost of diagnosing the P1209 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1209 FORD Description
The Powertrain Control Module (PCM) monitors the Injection Control System Pressure. The Diagnostic Trouble Code (DTC) indicates that Injection Control Pressure (ICP) was not to specification during normal driving conditions.