Injector Control Pressure Voltage Not At Expected Level
Table of contents
P1212 FORD Possible Causes
- Empty/Low Oil Reservoir
- Faulty Injection Pressure Regulator Valve
- Injection Pressure Regulator Valve harness is open or shorted
- Injection Pressure Regulator Valve circuit poor electrical connection
- Faulty Injection Control Pressure (ICP) Sensor
- Faulty High-Pressure Oil Pump
How do I fix code P1212 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1212 FORD code
The cost of diagnosing the P1212 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1212 FORD Description
The Powertrain Control Module (PCM) monitors the Injector Control Pressure Voltage. This Diagnostic Trouble Code (DTC) indicates that there was no Injection Control Pressure (ICP) present during cranking.