Throttle Position Sensor 2 Circuit Low Input
Table of contents
P1223 NISSAN Possible Causes
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
How do I fix code P1223 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1223 NISSAN code
The cost of diagnosing the P1223 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
An excessively low voltage from the Throttle Position (TP) sensor 2 is sent to Engine Control Module (ECM).
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1223 NISSAN Description
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. The Throttle Position (TP) sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.