Fuel Pump Driver Control Module Ignition On/Start Switch Circuit Low Voltage
Table of contents
P129D BUICK Possible Causes
- Faulty Fuel Pump Power Control Module
- Fuel Pump Power Control Module harness is open or shorted
- Fuel Pump Power Control Module circuit poor electrical connection
How do I fix code P129D BUICK?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P129D BUICK code
The cost of diagnosing the P129D BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P129D BUICK Description
The Fuel Pump Power Control Module monitors the ignition voltage circuit to determine if the voltage is within the normal operating range. The Diagnostic Trouble Code (DTC) will set when the Fuel Pump Power Control Module Power Mode does not agree with the Engine Control Module (ECM) Power Mode for 1 s.