Accelerator Sensor Range/Performance
Table of contents
P1307 KIA Possible Causes
- Faulty Acceleration Sensor
- Acceleration Sensor harness is open or shorted
- Acceleration Sensor circuit poor electrical connection
How do I fix code P1307 KIA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1307 KIA code
The cost of diagnosing the P1307 KIA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
If the value exceeds threshold value, the Engine Control Module (ECM) judged this as a fault and the P1307 is set.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1307 KIA Description
The Chassis acceleration(Rough Road) sensor consists of a piezoelectric vibration pick up which detects vertical acceleration of the vehicle.The sensor signal is used by the ECM to determine the degree of vertical movement of the car, for example, on a bumpy road.Since this may also cause uneven engine running, the ECM uses the signal to distinguish the phenomenon from actual misfiring.