Misfire Detected- Rough Road Data Not Available
Table of contents
P1380 SUZUKI Possible Causes
- Check other service codes first
How do I fix code P1380 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1380 SUZUKI code
The cost of diagnosing the P1380 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1380 SUZUKI Description
Correct engine misfire detection is dependent on whether or not the vehicle is experiencing a rough road condition. A rough road condition causes unexpected crankshaft fluctuations. In order to detect a rough road condition, the Electronic Brake Control Module (EBCM) communicates a wheel speed signal over the serial data circuit to the Engine Control Module (ECM). The wheel speed sensor information allows the ECM to distinguish if the crankshaft speed variations are caused by a rough road condition or are caused by a true misfire. The Diagnostic Trouble Code (DTC) will set if the ECM detects an engine misfire while the rough road signal is unavailable.