Fuel Tank Pressure Control System Malfunction
Table of contents
P1410 SUZUKI Possible Causes
- Faulty Tank Pressure Control Solenoid Vacuum Valve
- Tank Pressure Control Solenoid Vacuum Valve harness is open or shorted
- Tank Pressure Control Solenoid Vacuum Valve circuit poor electrical connection
How do I fix code P1410 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1410 SUZUKI code
The cost of diagnosing the P1410 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1410 SUZUKI Description
The P1410 code is set when there is a disagreement between Power Control Module (PCM) output signal to tank pressure control solenoid vacuum valve and monitor signal for 5 seconds. MIL is illuminated when PCM detects malfunction during 2 consecutive drive cycles.