EVAP System Small Leak Detected
Table of contents
P1442 LINCOLN Possible Causes
- Open or faulty gas cap
- Small leak in EVAP system-Check vent solenoid
- Faulty hose connection or leak in line
How do I fix code P1442 LINCOLN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- There is a factory service bulletin for the following Lincoln vehicles:
- 1997-1998 Lincoln Mark VIII
- 1997-2002 Lincoln Continental
- 1997-2003 Lincoln Town Car
- 2000-2003 Lincoln LS
- 1998-2003 Lincoln Navigator
- 2002-2003 Lincoln Blackwood
- Lincoln Factory Service Bulletin OBDII Code P1442
Cost of diagnosing the P1442 LINCOLN code
The cost of diagnosing the P1442 LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1442 LINCOLN Description
This diagnosis detects leaks in the Evaporative Emission System (EVAP) purge line using an engine intake manifold vacuum. If pressure does not increase, the Engine Control Module (ECM) will check for leaks in the line between the fuel tank and EVAP canister purge volume control solenoid valve under the following vacuum test condition.
The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.
The Diagnostic Trouble Code (DTC) will set when the EVAP control system has a small leak such as the loose fuel filler cap, the EVAP control system does not operate properly.