EVAP Canister Purge Control/Solenoid Valve
Table of contents
P1492 NISSAN Possible Causes
- Faulty EVAP Canister Purge Control/Solenoid Valve
- EVAP Canister Purge Control/Solenoid Valve harness is open or shorted
- EVAP Canister Purge Control/Solenoid Valve circuit poor electrical connection
How do I fix code P1492 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1492 NISSAN code
The cost of diagnosing the P1492 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1492 NISSAN Description
The system control the vacuum signal applied to the EVAP canister purge control valve.
When the Engine Control Module (ECM) detects any of the following conditions, current does not flow through the EVAP canister purge control solenoid valve.
The Solenoid valve cuts the vacuum signal so that the EVAP canister purge control valve remains closed.
Conditions:
– Start switch ON
– Closed throttle position
– Low or high engine coolant temperature
– During deceleration
– Engine stopped