Crankshaft Position Sensor Signal Intermittent Interruption
Table of contents
P15C0 HONDA Possible Causes
- Faulty Engine Mount Control Unit
- Engine Mount Control Unit harness is open or shorted
- Engine Mount Control Unit circuit poor electrical connection
How do I fix code P15C0 HONDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P15C0 HONDA code
The cost of diagnosing the P15C0 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P15C0 HONDA Description
The engine mount control system controls the engine mounts electronically. The system consists of the active control engine mount (ACM) actuators, the engine mount control unit, and the Powertrain Control Module (PCM). The engine mount control unit uses the crankshaft and camshaft position sensor outputs (received from the PCM) to estimate engine vibration. The engine mount control unit then sends signals to the ACM actuators to command the engine mounts to push and pull on the engine to counteract the engine vibration. The PCM monitors the CKP signal input to the engine mount control unit, and when an abnormal condition continues for a set time, the PCM detects a malfunction and a DTC is stored.