Engine Calibration Information Not Programmed-GPCM
Table of contents
P160C GMC Possible Causes
- Program Injector Flow Rate in Glow Plug Control Module (GPCM)
How do I fix code P160C GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P160C GMC code
The cost of diagnosing the P160C GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P160C GMC Description
The control functions for the fuel injection system are integrated in the Engine Control Module (ECM). During the manufacturing process, each injector’s flow rate is measured and recorded as injection quantity adjustment (IQA) flow rate data. The flow rate data is then etched as a hexadecimal number on the body of the injector. This data, together with the injector’s cylinder position, is stored in the memory of both the Glow Plug Control Module (GPCM) and the ECM. When the ignition is turn ON, both the GPCM and the ECM monitor to ensure that the fuel injection flow rate numbers are present. If any of the injector flow rate numbers are missing, the diagnostic for that control module will set the appropriate DTC.