O2 Sensor Positive Current Trim Circuit Performance Bank 1 Sensor 1
Table of contents
P164A FORD Possible Causes
- Faulty Universal HO2S
- Universal HO2S harness is open or shorted
- Universal HO2S circuit poor electrical connection
How do I fix code P164A FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- There is a factory service bulletin for the 2011-2012 F-Super Duty:
- 2011-2012 Ford F-Super Duty Factory Service Bulletin OBDII Code P164A
Cost of diagnosing the P164A FORD code
The cost of diagnosing the P164A FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P164A FORD Description
A resistor is installed in the universal Heated Oxygen Sensor (HO2S) connector for part to part variance. The Powertrain Control Module (PCM) determines the value of this resistor by taking multiple measurements of the resistor during each ignition ON event. The PCM uses this value in order to compensate for the variance in the pumping current signal. The test fails if the PCM receives an inconsistent or erratic measurement of the resistor.