Alternator FR Terminal Circuit/IGP Circuit Low Voltage
Table of contents
P16BC Possible Causes
- Faulty Alternator
- Alternator harness is open or shorted
- Alternator circuit poor electrical connection
How do I fix code P16BC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P16BC code
The cost of diagnosing the P16BC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P16BC Description
The alternator is driven by the engine and generates electricity to supply the necessary power to the electrical load and to charge the battery. The alternator voltage target values of 14.5 V and 12.5 V are achieved by switching the alternator control mode (controlled by the Powertrain Control Module (PCM)). The alternator output signal is sent to the PCM, and it varies according to the batteryís state of charge, the electrical load, and the engine speed.
When the engine speed is a specified value and the IGP terminal voltage is below a set value when the alternator is in the 14.5 V mode, and the alternator power generation amount is a set range or less, and this condition continues more than a set time, the PCM detects a malfunction and a Diagnostic Trouble Code (DTC) is stored.