Turbine Revolution Sensor
Table of contents
- Possible Causes
- How To Fix
- Tech Notes
- Cost To Diagnose
- When is the code detected
- Possible Symptoms
- Description
P1716 INFINITI Possible Causes
- Faulty Turbine Revolution Sensor 1, 2
- Turbine Revolution Sensor harness is open or shorted
- Turbine Revolution Sensor circuit poor electrical connection
How do I fix code P1716 INFINITI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- On most newer Infiniti models the Turbine Revolution Sensor is part of the transmission valve body inside the transmission.
- There is a factory service bulletin for the 2003 Infiniti G35. The bulletin suggests reprogramming the Transmission Control Module to repair the problem.
Cost of diagnosing the P1716 INFINITI code
The cost of diagnosing the P1716 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The P1716 code is set when the Transmission Control Module (TCM) does not detect the signal from the sensor.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1716 INFINITI Description
The Turbine Revolution Sensor detects input shaft rpm (revolutions per minute). The sensor it’s located on the input side of the automatic transmission. Monitors revolution of sensor 1 and sensor 2 for non-standard conditions.