A/T Clutch Pressure Control Solenoid Valve Circuit
Table of contents
P1768 ISUZU Possible Causes
- Faulty Clutch Pressure Control Solenoid Valve
- Clutch Pressure Control Solenoid Valve harness is open or shorted
- Clutch Pressure Control Solenoid Valve circuit poor electrical connection
How do I fix code P1768 ISUZU?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1768 ISUZU code
The cost of diagnosing the P1768 ISUZU code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1768 ISUZU Description
The A/T clutch pressure control solenoid valve is used for shift control and lock-up control. A spool in the A/T clutch pressure control solenoid valve pushes a valve according to the duty cycle that is controlled by the Powertrain Control Module (PCM) to pressurize fluid so the hydraulic pressure is proportional to the current. The PCM measures the current flowing through the A/T clutch pressure control solenoid valve and uses feedback control to compensate the difference between the actual current and the commanded one. If the measured current for the PCM output duty cycle is not within a specified range (open or short to ground), a malfunction is detected and the P1768 code is set.