ST Solenoid Valve Circuit Malfunction
Table of contents
P1790 TOYOTA Possible Causes
- Open or short in shift solenoid valve ST circuit
- Shift solenoid valve ST
How do I fix code P1790 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1790 TOYOTA code
The cost of diagnosing the P1790 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
ECU memorizes DTC P1790 if (a) or (b) condition below is detected once or more, but ECU does not start MIL blinking.(a)Solenoid resistance is 30 W or lower (short circuit) when solenoid energized.(b) Solenoid resistance is 100 kW or higher (open circuit) when solenoid is not energized.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1790 TOYOTA Description
Shift solenoid valve ST is switched ON-OFF by a signal from ECM so that let in or out timing of 2nd brake is adjusted by operating orifice control valve. Therefore, shift solenoid valve ST operates when letting in or out reverse clutch. f it is broken, the shift shock becomes big.