Clutch Pressure Cut Spool Sticking
Table of contents
P180C MITSUBISHI Possible Causes
- Faulty Clutch Pressure Cut Spool
- Clutch Pressure Cut Spool harness is open or shorted
- Clutch Pressure Cut Spool circuit poor electrical connection
How do I fix code P180C MITSUBISHI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P180C MITSUBISHI code
The cost of diagnosing the P180C MITSUBISHI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P180C MITSUBISHI Description
The Transmission Control Module (TCM) monitors the Clutch Pressure Cut Spool. The TCM sets the OBDII code when the Clutch Pressure Cut Spool is not to factory specifications.