Hybrid Battery Current Sensor Performance
Table of contents
P1A4B CHEVROLET Possible Causes
- Faulty Hybrid Battery Current Sensor
- Hybrid Battery Current Sensor harness is open or shorted
- Hybrid Battery Current Sensor circuit poor electrical connection
How do I fix code P1A4B CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1A4B CHEVROLET code
The cost of diagnosing the P1A4B CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1A4B CHEVROLET Description
The closed loop principle makes use of a zero-field detector signal which is processed to drive a current through a compensation coil in such a way, that it balances out the magnetic field of the applied current at any time. Thus the compensation current is proportional to the current to be measured. In contrast to common Hall-detectors the patented soft magnetic VAC-probe made from a small strip of amorphous metal VITROVAC(tm) is strictly symmetric with respect to the magnetic field. Therefore it generates no offset contribution to the sensor. Moreover, the symmetry is neither affected by temperature changes or any aging effects. This enables for very high accuracy, nearly zero offset, and excellent stability over temperature and time.
In current sensors based on the closed loop principle the primary current conductor is lead through a magnetic core. The magnetic field of the primary current is concentrated in the magnetic core is detected by a soft-magnetic field probe in an air gap of the core. By means of a current through an additional winding on the core, the magnetic flux of the primary current is compensated. The magnetic flux in the core is held at zero value. The compensation current is proportional, and is an image of the primary current.
The current sensors are based on the closed-loop principle. A soft-magnetic probe is used as field detector of the primary current magnetic field. Compared to standard sensors with Hall-probes, the magnetic probe offers the following application advantages:
– Low offset currents
– Small temperature dependence
– No long term drift of offset current
– Small offset current forces
– Compact size
– Separate electronics available