Starter/Generator Phase U Current Sensor Circuit Low Voltage
Table of contents
P1AB3 CHEVROLET Possible Causes
- Faulty Starter/Generator Control Module (SGCM)
- Starter/Generator Control Module (SGCM) harness is open or shorted
- Starter/Generator Control Module (SGCM) circuit poor electrical connection
How do I fix code P1AB3 CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1AB3 CHEVROLET code
The cost of diagnosing the P1AB3 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1AB3 CHEVROLET Description
The Starter/Generator Control Module (SGCM) phase U/V/W current sensors are used for motor control and power inverter module (PIM) current sensor rationality check. The SGCM monitors the current sensor for the following:
– To detect a failure of the U/V/W-phase current sensor circuit below valid range.
– To detect a failure of the U/V/W-phase current sensor circuit above valid range.