Drive Motor 1 Control Module Hybrid Battery System Voltage High
Table of contents
P1AEE CHEVROLET Possible Causes
- Faulty Drive Motor Generator Power Inverter Module
- Drive Motor Generator Power Inverter Module harness is open or shorted
- Drive Motor Generator Power Inverter Module circuit poor electrical connection
How do I fix code P1AEE CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- 2017 Malibu and Volt models. These models are equipped with the 5ET50 automatic transmission (RPOs MKV, MKE), which is an electronically-controlled, continuously-variable electric transmission (or drive unit) on hybrid models.
- The following DTCs may be set:
- – P1AEE – Drive Motor 1 Control Module Hybrid/EV Battery System Voltage High Voltage
- – P1AEF– Drive Motor 2 Control Module Hybrid/EV Battery System Voltage High Voltage
- – P1AF0 – Drive Motor 1 Control Module Hybrid/EV Battery Voltage System Isolation Lost
- – P1AF2 – Drive Motor 2 Control Module Hybrid/EV Battery Voltage System Isolation Lost
- – P1E22 – Auxiliary Transmission Fluid Pump Control Module Hybrid/EV Battery Voltage System Isolation Lost
- If only two or three of these DTCs are set, follow the appropriate Service Information diagnostic procedures. The cause may not be any internal components of the transmission.
- If all five DTCs are set, there is an internal fault with the transmission and the transmission requires replacement. Do not attempt any internal repairs.
Cost of diagnosing the P1AEE CHEVROLET code
The cost of diagnosing the P1AEE CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1AEE CHEVROLET Description
The Drive Motor Generator Power Inverter Control Module contains two motor control modules. Each motor control modules measures hybrid battery high voltage with several internal sensors. The battery energy control module also monitors high voltage with several internal sensors. The battery energy control module high voltage measurement is broadcast over serial data.