Gear Shift Actuator 1 Circuit High
Table of contents
P1CB6 JEEP Possible Causes
- Faulty Engage Valve
- Engage Valve harness is open or shorted
- Engage Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How do I fix code P1CB6 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CB6 JEEP code
The cost of diagnosing the P1CB6 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CB6 JEEP Description
The Transmission Control Module (TCM) monitors the Gear Shift Actuator P2 (PPV-1) (Engage Valve) and circuits for errors. If the TCM detects an error in the Gear Shift Actuator P2 (PPV-1) (Engage Valve) circuit, the Diagnostic Trouble Codes (DTC) will be set.