Clutch 1 Pressure Disengagement Too Low
Table of contents
P1CC2 JEEP Possible Causes
- Transmission Hydraulic System
- Transmission Mechanical Operation
- Faulty Transmission Controller Module (TCM)
How do I fix code P1CC2 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CC2 JEEP code
The cost of diagnosing the P1CC2 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CC2 JEEP Description
The odd clutch normally functions at positions in between fully engaged (clutch closed) and fully disengaged (clutch open). This diagnostic checks if the odd clutch is stuck in a position closer to the clutch closed position than the requested position. This is caused either by a mechanical failure of the clutch or by a blocked odd clutch solenoid valve which keeps fluid pressure too low and the clutch closed. The odd clutch solenoid valve has the following characteristic: When the solenoid valve current is high, the valve opens and the fluid pressure disengages the odd clutch.