Clutch 2 Pressure Engagement Too Low
Table of contents
P1CC4 JEEP Possible Causes
- Transmission Hydraulic System
- Transmission Mechanical Operation
- Faulty Transmission Controller Module (TCM)
How do I fix code P1CC4 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CC4 JEEP code
The cost of diagnosing the P1CC4 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CC4 JEEP Description
This diagnostic checks if the even clutch is stuck in the disengaged position due to a mechanical fault or due to a low hydraulic pressure. In both cases, a failure is detected when the Transmission Controller Module (TCM) sends a control signal to engage the even clutch and the even clutch pressure sensor indicates that the clutch is disengaged.