Unable To Engage Gear
Table of contents
P1CC9 JEEP Possible Causes
- Transmission Hydraulic System
- Transmission Mechanical Operation
- Faulty Transmission Controller Module (TCM)
How do I fix code P1CC9 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CC9 JEEP code
The cost of diagnosing the P1CC9 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CC9 JEEP Description
This diagnostic checks for the proper operation of the gate select and the four gear shift engagement actuators. The total number of performed operations and the number of failed operations by the gate select actuator and the four gear shift engagement actuators during a trip are accumulated in the internal memory of the Transmission Control Module (TCM). The registers in the internal memory which contain these counters are cleared after every trip. When the accumulated number of failed operations by the gate select actuator or by the four gear shift engagement actuators during a trip is greater than a corresponding threshold, this diagnostic will be considered failing.