Excessive Clutch Wear
Table of contents
P1CCA JEEP Possible Causes
- Worn Odd Clutch
- Worn Even Clutch
- Transmission Hydraulic System
- Transmission Mechanical Operation
- Faulty Transmission Controller Module (TCM)
How do I fix code P1CCA JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CCA JEEP code
The cost of diagnosing the P1CCA JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CCA JEEP Description
This diagnostic detects excessive clutch wear by checking for clutch slippage and low torque transmission of both clutches. The diagnostic compares the odd clutch speed to the engine speed when the engaged gear is an odd gear (1st, 3rd, 5th, Reverse) or the even clutch speed to the engine speed when the engaged gear is an even gear (2nd, 4th, 6th). If the difference in speed is greater than a threshold and the integral over time of the difference in speed is greater than a threshold, then the diagnostic is considered failing.