Transmission Initialization Failed
Table of contents
P1CCD JEEP Possible Causes
- Transmission Hydraulic System
- Transmission Mechanical Operation
- Faulty Transmission Controller Module (TCM)
How do I fix code P1CCD JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CCD JEEP code
The cost of diagnosing the P1CCD JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CCD JEEP Description
This diagnostic checks if the Transmission Controller Module (TCM) is capable of identifying the engaged gear after the initialization is performed at power ON of every trip. The TCM looks at many different parameters including the actuator position sensors to determine what gears (if any) are engaged. If the TCM cannot resolve conflicting information or otherwise determine what gears are engaged then a fault is set.