Hydraulic Pump Driver Feedback Range-Performance
Table of contents
P1CCE JEEP Possible Causes
- Faulty Smart Drive Unit (SDU)
- Smart Drive Unit (SDU) harness is open or shorted
- Smart Drive Unit (SDU) circuit poor electrical connection
- Faulty Transmission Controller Module (TCM)
How do I fix code P1CCE JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CCE JEEP code
The cost of diagnosing the P1CCE JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CCE JEEP Description
This diagnostic checks for the range of the hydraulic pump driver feedback signal provided by the Smart Drive Unit (SDU) to the Transmission Control Module (TCM). The SDU unit drives the hydraulic pump by actuating a PWM command signal received from the TCM. The normal range of the hydraulic pump driver feedback signal is up to 30% of the power supply voltage.