Variable Valve Solenoid Valve Cold Start Closing Position 1 Timing Over-Retard
Table of contents
P1CEC JEEP Possible Causes
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Timing Chain
How do I fix code P1CEC JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1CEC JEEP code
The cost of diagnosing the P1CEC JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1CEC JEEP Description
The Multiair system controls the intake valve opening and closing time for faster catalyst light-off at cold starts. For the 2.4L engine, only early valve closing strategy is applied. The monitor detects any malfunction that will cause the intake valve closing time to be over advanced or over retarded by an amount that prevents the fast catalyst light-off.