Pressure Control Solenoid 1 Or 2 Stuck ON-OFF
Table of contents
P1D32 JEEP Possible Causes
- Transmission Hydraulic System
- Transmission Mechanical Operation
- Faulty Transmission Control Module (TCM)
How do I fix code P1D32 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1D32 JEEP code
The cost of diagnosing the P1D32 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1D32 JEEP Description
The transmission gear disengagement mode means that the spool is moved to a position that allows fluid pressure coming from the pressure control solenoids (electrovalves) PPV1 and PPV2 to move the actuator to disengage the target gear and move it to its intermediate neutral position. This diagnostic checks for the proper operation of the electrovalve PPV1 which engages 2nd, 3rd or Reverse gear and of the electrovalve PPV2 which engages 1st, 4th, 5th or 6th gear . The diagnostic performs seven different tests during the gear disengagement mode to ensure that the electrovalves are capable to disengage the target gear and stop the actuator in the intermediate neutral position. This is accomplished by verifying that the opposite gear of the target on the same actuator is disengaged. If one of these tests fail the diagnostic will be considered failing.